Milk Tester Pasteurization System / H.T.S.T.

---

      Start and stop probe assemblies are mounted at 2 different areas on the pasteurization holding tube. The top of the SSI-003 salt injector is attached to a pressurized air source while the bottom is attached to the start probe injection nozzle with high pressure reinforced tubing. Once the SSI-001 liquid output valve is manually opened, saline solution is injected into the holding tube which starts the counter. When the saline solution reaches the stop probe, the counter stops providing the elapsed time. The operator can then run additional tests to satisfy the health code.

 Standard Equipment

• MTC-4000 MILK TESTER

• PROTECTIVE PLASTIC, FOAM INSULATED CONTAINER

• USB CABLE AND WALL CHARGER (NOT SHOWN)

• 2 - 2J1.5" JACKS FOR PROBE TO UNIT CONNECTION

• 2 - 2DCF1.5" START/STOP PROBES

• 2 - 2DCF2" START/STOP PROBES

 (ALTERNATE TYPE & SIZE PROBES AVAILABLE) 

*** All Probes have Tri-Clamp Caps and are 4” in length unless otherwise specified.